front bumper alignment

Discussion in 'Body Restoration' started by soundman, Apr 20, 2009.

  1. soundman

    soundman Member

    39
    0
    Feb 15, 2009
    Tulsa OK
    Hi guys,
    Looking for some feedback before digging in. As you can see from the pic, my front bumper appears to be drooping down. This is a low mileage car, taken care of. I crawled underneath for a closer pic, and nothing appears broken or tweaked. If I dig in and don't find anything, can I shim the bottom bolts to bring it up a bit? Or will that be a no-no? Thanks, Terry


    1976 Camaro LT "]1976 Camaro
     
  2. soundman

    soundman Member

    39
    0
    Feb 15, 2009
    Tulsa OK
    Dangit, link attempt didn't work.....pic is in my signature.
     
  3. olstyle

    olstyle Veteran Member Lifetime Gold Member

    8,726
    0
    Jan 27, 2008
    Crestwood IL.
    Theres slots in the frame and frame brackets, so I would try to loosen the 4 bolts and jack it up with a floor jack and a piece of 2x4.
     
  4. soundman

    soundman Member

    39
    0
    Feb 15, 2009
    Tulsa OK
    Thanks olstyle....the 4 bolts you are talking about, where the shock looking things bolt to the front of the framehorns?
     
  5. olstyle

    olstyle Veteran Member Lifetime Gold Member

    8,726
    0
    Jan 27, 2008
    Crestwood IL.
    Theres 2 bolts on the outside of each frame horn.
     

Share This Page