Separate names with a comma.
Discussion in 'High Tech Retrofits' started by 408maro, Dec 18, 2016.
How did you'll with corvette pedal mount it?
that bracket is for a different style pedal.. may work with fab work, but dont have a welder to do all that.. looks like DSE makes one but only for a 1st gen..
ironworks makes one for a different pedal aswell
Use the pedal with the scarebird kit.
thank you.. i will give them a call and see if they have any ideas on the wiring.. looks like it is different and may not work, dont really want to cut my PSI harness
If its the same pin, it should work. But worst case, re-pinning a GM connector is easy. Scare bird will know for sure.
Any pics of the installs and pedal?
Go to #3 and scroll down. There are some pictures of how I did it. It was kind of a PITA making it fit. There may be a different style of pedal that would be easier to fit.
There is one made for Fbodies
FWIW, here is an album with some pics of the gas pedal installed using the Scarebird bracket.