old cam dynamics hyd cam

Discussion in 'High Performance Modifications' started by muscl car, Apr 9, 2012.

  1. muscl car

    muscl car Veteran Member Lifetime Gold Member

    this is an old single pattern cam from cam dynamic that is now listed under crane cams energizer cams 302 dur/500lift .is this still a good cam it is a strong mid range 3400-7200rpm and 246 @ .050 specs

    Performance usage, good upper RPM torque and HP, bracket racing; Heavy, Pro ET, Super ET, etc., auto trans w/3500+ converter, oval track; Street Stock, Enduro, Hobby, etc., 3/8- 1/2 mile, 10.5 to 12.0 compression ratio

  2. 450bench

    450bench Veteran Member

    Feb 25, 2002
    memphis, tn-shelby
    Yes it is a good cam...I ran that exact cam in a Vega with a 327 in it years ago...It's cut on a 106 and with flat tops and 62 cc heads, maybe 10 to 1 compression, it ran 7.00s and 6.90s in good weather...Sounded like a freight train...Quick revs and started making power around 3000 if I remember...

    That motor is now in my friend's 66 chevy II...Freshened it up last years and runs strong...Makes around 6 inches of vacuum in his car so I set his 750 dp up a with 2.5 power valve

    Sounds similar to the old 754 chevy cam
  3. hhott71

    hhott71 Veteran Member Lifetime Gold Member

    Mar 30, 2001
    Joplin Mo. 64801
    I ran the next size smaller 286 enforcer in the flat top 350 I had for decades. Went as quick as 12.06 with 041 heads in the Vega, and finally as quick as 11.30's regularly with Canfield heads. .473" lift , It's now a Crane energizer cam.
    The 306 Enforcer is the Cam you describe and should prove to be quite powerful.
  4. Last edited: Apr 10, 2012
  5. muscl car

    muscl car Veteran Member Lifetime Gold Member

  6. sweetsoul

    sweetsoul Veteran Member

    Jan 12, 2010
    Liberty sc
    i put that same cam in a 305 i built a few years ago.it had flat tops , 52cc heads and a single plain intake and we got just over 400hp on the dyno.

Share This Page