Parking brake

Discussion in 'Tips 'n' Tricks Topic' started by Jak33C, Jul 20, 2016.

  1. Jak33C

    Jak33C New Member

    8
    0
    Jul 13, 2016
    Lexington, KY
    In my 1981 camaro I have disconnected the two bolts through the firewall and the one through the kick panel but it won't come off. Is it glued on? What am I doing wrong? I need to get the drivers side kick panel off.
     
  2. 81BirdMan

    81BirdMan Veteran Member

    762
    1
    Jan 31, 2004
    Is the tar-like, sound deadening material causing it to stick?

    http://www.nastyz28.com/forum/showthread.php?t=21826

    Also, according to a post in that thread (#9), there's a bolt at the top of the assembly, not just through the kick panel.

    You can see the upper, slotted bolt hole in this photo:

    [​IMG]
     
    Last edited: Jul 20, 2016
  3. Revin

    Revin Veteran Member

    109
    4
    Aug 31, 2016
    Round Rock , TEXAS
    yep just took mine out yesterday.
    upper and lower bolt and 3 nuts. ( 2 on inside firewall and one on a stand off in side.
    Yep the sound deadening junk was melted on mine and had to wiggle it off.
     

Share This Page