Quick ? about 70-73 rear license plate lighting assy.

Discussion in 'Body Restoration' started by Tru70SS/RS, Feb 28, 2006.

  1. Tru70SS/RS

    Tru70SS/RS Veteran Member

    quick question:

    i know the rear license plate light assemblies consists os a pair of lenses and gaskets that mount to the inside of the trunk. but is there a bezel that mounts on the outside (surrounding the lock)?
  2. fbodyfreak

    fbodyfreak Veteran Member

    Oct 18, 2005
    Briceville, TN
    surrounding the lock there is a bezel, surrounding the lights- no. they just have 2 screws showing and the lenses, which mount from the inside like you said earlier.
  3. Tru70SS/RS

    Tru70SS/RS Veteran Member

    thanks for confirming!
  4. kenai9

    kenai9 New Member

    May 27, 2008
    Juneau, AK
    Rear license plate light assmbly

    I found this thread on 70-73 rear licensce plat lighting assy. I am installing these on my 71 Camaro and had the same question. It has been 2 years since taking the car apart...Finally putting it back together after body work and paint...

    Does anyone have a picture of the license plate light assmby taken from the outside that shows the two phillips head screws on each side? Just want to make sure I am doing this correctly...there's no information in the Assembly Manual on this.

    Thanks, Ed

Share This Page