Separate names with a comma.
Normally I've run a simple PVC to carb base on one valve cover, and a breather on the other. Works well and has for years. Tried without the...
A well matched converter will get the best out of any engine.
Say, "This is the converter I intend to use, build an engine to match."
After a brief conversation, re-think the converter and get a new one....
There should be a a little movement left at wot. At rest, the arm should move as soon as the throttle does.
I'll concur with the 15mpg ideas. The one time I drove for economy in my car, I wired the secondaries closed, jetted as lean as I dared, and stuck...
Jeez Damon, I don't know about that...I went through a pile of work milling domes on a set of old TRW's for a closed chamber and they still made...
Wow, those are pretty easy on the wallet. I know a reasonable goal is easy with even stock heads, but personally, I'd just rather work with new...
Back and forth from Quesnel to the Island.
295/50s 8.5" ~3.5" bs my diff is a 9" and it was a bit shorter than stock 10 blt.
rolled the fender lip, and hammered in the 3"...
Just do what GM recommends. New engines are designed for it.
^^^^^ Shot missed.
If you actually make (and use) that much power, and have any intention of beating on it, I'd suggest a 4l80.
I had a roller rocker come apart once. 3 years later I got the last bearing needle on the magnetic drain plug. Years ago I smashed the magnet off...
Kioti 2410 and a 50" blower.
Endorsed by Palin - $340 USD
Still for sale!
New price, due to the falling Loonie, $350!!!