Separate names with a comma.
It can be done in the car, with the 2x4s like others have stated. I prefer to pull the motor and do it out of the car. also if it is out of the...
s the 502 is a short deck BBC. only the 366, 427 heavy duty truck motors with 4 ring pistons were offered in tall deck form. the 572 and 572R...
John, I don't have a 1970 Camaro assembly manual to look at the LS6 option. I have only ever seen couple real L78 cars and I have only seen...
my 71 SS396 LS3 car also has the 6440727 pump. the L78 and LS6 did not use a fuel return line, were the L34 and LS3 cars have a fuel filters that...
to be honest, I believe all 71 and 72 cars with Z27 are SS350 cars. the Z27 LS3 or LS3 were used for big block cars. that said, their are a lot of...
that Mallory could be for an early Vette with the mechanical tach. however they were also used in Marine applications. I had one in a 74 Hondo SK...
John, My car is a 71 SS 396 with a 4 speed Muncie M20. my assembly manual shows the 3913498 transmission mount and the 3964800 frame cross...
there were a couple of different steering wheels. the one pictured above is the optional NK4 steering wheel. the standard wheel was a single bar...
I love that you put mist green on it. you don't see that on very many cars. that L88 hood is also pretty sweet.
the best write with scientific evidence to back it up is here. https://540ratblog.wordpress.com/2013/06/20/motor-oil-wear-test-ranking/ there...
supposedly, the Corvette exhaust manifolds were the better flowing ones. but they are the center dump ram horn style on a small block, so I doubt...
I believe its the exhaust port location that is diffrent. the iron heads (Casting # 340292) were over the counter high performance replacement...
I am glad to here the Torker 2-O fits with the addition of the L88 drop base. My car is missing the factory air cleaner, so I have just been...
I think the spacing from oilpan to cross member depends on what motor mounts you use. 70-71 use a tower style mount with the rubber mount on the...
71 RS BBC. there is a lot more to putting a big block in a Camaro than just motor mounts. I don't know much about your specific car. however here...
[ATTACH] [ATTACH] I have a 71 SS 396 LS3 car. I can tell you from experience that the engine should fairly sit low in the chassis about 1/2-3/4...
I think Hooker Headers was the last company making them for second gen Camaros, and only of the small block. I think they discontinued them a few...
From everything I have read and everyone I have talked at car shows, they all say go with AMD for quarters. From what I heard AMD was started by a...
it depends on what your looking for out of your car. if you just want it running I say go with the 305 as it is already running, but there are...
I have never seen that casting number before. almost all small block casting numbers begin with a 3 or 1, with the exception of 76-82 305 and 267...
