Separate names with a comma.
My brakes were in bad shape and needed everything except the backing plates to get back working, so I decided to replace with the 11" drums. I got...
I have the 11" drums on my Firebird, only issue I had is the shock mount needs to be ground down some to keep the drum from rubbing when making...
stock length is 1.25 inch I used 1.5 inch and they worked fine as well
I have a momo wheel and I used a hub from ididit
This is the hub I used, wheel mounts to hub just like the factory wheel did.
SPI Epoxy, it stays flexible and does not need any additive.
I had the same problem, the chrome plating is on the entire inside and shorts the hot and ground. I sandblasted the chrome off of the area where...
My 2004r has bolt holes for both chevy and BOP.
Get a piece of copper pipe or electrical conduit the size of the hole you want and heat with a torch, push the pipe into the carpet and it will...
I skipped the connectors and soldered the plug pigtails to the harness.
I figured the sockets are only available with the pigtails attached.
Oven cleaner should also work as it is also mainly sodium hydroxide, plus has that nice lemon smell.
The floor on the later years has a hump that the earlier years do not have.
Here you go
I ordered a set of door skins (AMD) from summit and they arrived in a single box that looked like it was drug through hell. Both skins were just...
I glued reflectix to the back of my headliner board, worked great and is very light as it is just bubble wrap with a foil backing on each side.
Biggest problem with the HWY series is that the fuse block will not fit back in the stock location.
Sorry, I don't enough to bother with, just enough to cover the bottom of the can. Must have used more that I thought.
I probably have a quart I can spare, I'll check tomorrow.
How fast do you need it?
As far as strength, mine was way over kill..
I used doubled 2x6 on the ends and each X was interlocked so the joint was not just held by screws...
I had the 2x6's left over from my storage building.
Mine worked great, I could spin the car with one finger.
I even put casters on it so I could roll it outside.
Best $50 bucks I ever spent.