Separate names with a comma.
No sir I converted my 75 to a 70 so I swapped over 1970 AMD full quarters to my 75.
I used AMD quarters. Stamp seemed ok to me. Tail panel was a different story, I bought a cheap one first then had to bite the bullet and buy a...
haven't done full quarters on a 74 but did swap 70 quarters onto my 75 and it wasn't that bad. Take your time and do 1 side at a time is my...
Can they be had at Fastenal
Has anyone used circle D converters? They are recommending the 3000-3200 converter for my application.
The car is a street cruiser not a drag car at all. Want good performance while still drivable in town. IE: don’t want the tires screeching every...
thanks for the info cork. What stall would you recommend for this size cam?
I talked to a local LS tuner and he recommended I install an aftermarket stall converter to help bring my LS to life. I have a 5.3 with a Lunati...
Adding to this, I just spoke with PSI and there is a park/neutral wire that is part of the "under dash" wires on their harness that is listed as...
come to think of it, wouldn't this wire be plugged into the transmission for this signal? Im running a 4l60e from a 2005 silverado
The impressive part is under the hood.......:smokin:
I believe there is an IAC on the side of the throttle body
not sure but I will check this afternoon. If not, how can this affect the idle
Thanks for the info
bump to hopefully revive a really cool thread! Hey OP whats the status on your conversion???!!!!!
Factory PCM with a PSI harness.
Drove around for about an hour Sunday morning.
Even let the old lady drive it for a few miles.
Got a 5.3 LS in it and it runs great but every once...
Any other pics or info on this install
I was able to fit 285 in the rear
Love it! I am in the midst of converting a 75 to a 70 split bumper RS.
Lots of work but everyone you explain it to afterwards is always in shock
I think I eliminated over 75 pounds of junk when I tucked my bumpers way back when.
Could've eliminated a lot more but wasn't really worried about...