Separate names with a comma.
Mopars were designed to be installed from the bottom being attached to the "K" member as a complete unit .I have done it But you need a lift to do...
Sometimes you wonder what some people are smoking ? And or have too much time on their hands and very poor imagination .
He was probably thinking of a big block .The small block doesnt. So what are you going to do with the car.?
Have you watched any of the Motor Trend shows such as Texas Metal could help.
Have you talked to the header manufacturers like Hooker .Headman .etc ?
Maybe a "G' body .78-87 Malibu .El Camino etc might work .
They were more of a "stock" car than they are now,
It also depends if you are still working and at least getting an income as well.
I had the stock box rebuilt by a friend of mine .In my 1979 Z-28 And replaced and upgraded the steering linkage .
No its different The Nova is different .A 12 bolt and a 8.5 10 bolt .They came in both 1972-81 Camaros and Firebirds .The 8.5 was a replacement...
I have a seat of Doug Thorley "big tube "headers on my 1979 Z-28 .And there is no issues in clearance
Its not hard to rebuild them yourself if you have any mechanical skills .Otherwise an Auto parts store .and there usually a local shop who...
I have a 1979 Z-28 thats was a loaded model. It probably ran 15`s in the quarter mile .
Check on looms for street rods with that type of engine .They usually run them because of tight engine bays .Otherwise just get creative and make...
I have 17 x 8`s on my 1979 Z-28 .You just have watch your offset and tire size when you do so.
well you just do it as you can .Remember its a hobby.
I run a Centerforce clutch in my 1979 Z-28 ,But most of the time on the street a good diaphram clutch will work.Especially with the traffic is...
There should be n article in the archives from Hot Rod Magazine on how to make a hood functional 78 and 79 models .By C.J.Baker . There was even a...
I had a friend of mine who had his own shop do it . Its too critical to do it otherwise