controle arm bushings home build

Discussion in 'Suspension, Steering, Brake & Wheel Topics' started by jteu2002, Jan 11, 2008.

  1. jteu2002

    jteu2002 Veteran Member

    Jan 8, 2007
    i got about 5 yards of the stuff at work

    it seem to be the same stuff as the del-a-lum bushings are made of
    (delin ore POM depending on the supllier)

    i can make the compleet bushing out of that stuff and use a 1" piston rod drilled out to the oem bold size
    ore do i need an alu sleeve that goes in the arm itself and delrin washers

    i made the bushings with grease fittings and delrin washers already for the rear will post pics later
  2. John Wright

    John Wright Veteran Member Lifetime Gold Member

    Aug 9, 2002
    Rustburg, Va
    I don't see why that won't work. At one time I had thought about making some, but just purchased them instead...

Share This Page