TH350 crossmember question

Discussion in 'Transmission & Driveline Topics' started by RicksTrucks, Apr 20, 2006.

  1. RicksTrucks

    RicksTrucks New Member

    Apr 20, 2006
    Claremore, OK
    Between the crossmember and the transmission yoke, there is a plate that looks like it is held in place by three bolts. The middle one goes thru the support. The back two, transmission side of the plate on each side, go into the plate and transmission. I am missing both of them. What size bolt goes in there? Looks like the middle bolt is keeping it in place.

Share This Page