Search results

  1. jakob stevanus

    78 z28 Stall selection

    Ok thank you yes more street then strip for sure but fun on the street .
  2. jakob stevanus

    78 z28 Stall selection

    Hi I'm wondering at stall selection for my build I'm thinking 2500 BM holeshot any advice or suggestions would be great . Engine and 350 gen 1 --9.5.1 comp , 193 heads bowl ported and take ramp clean up , performer air gap intake , 650 street Demon carb , comp cam k12/ 234 ( [email protected] / [email protected]
  3. jakob stevanus

    4 speed transmission identification

    Could it be a t5 and I have lost the 5th gear . Guy I bought it from said it's 4 speed car but the casting numbers say t5. Maybe the ring snapped and lost 5th gear ? I head that happens sometimes with the t5 have you heard of this
  4. jakob stevanus

    4 speed transmission identification

    Let's say Chevy but they make a plate to use BOP on SBC for 70$ I think I saw . Big question is will my drive. Shaft work and my cross members ?
  5. jakob stevanus

    4 speed transmission identification

    If I pull my motor and tranny and bit in my new 70s 350 would a 80 th350 from a fire bird bolt right up and work ? Right now the motor in my 78 is a 305 88-94 year. Motor and has that transmission pictured which I believe from numbers is a t5
  6. jakob stevanus

    4 speed transmission identification

    13-52-066-923 is 83-87 Camaro that's all I could find online after looking forever but it ssstated it as a t5 transmission matched my tail casting # however I don't have a 5th gear .
  7. jakob stevanus

    4 speed transmission identification

    The number I pull off the tranny and matchh to Borg Warner is 13&52-006-923 which comes up as t4
  8. jakob stevanus

    4 speed transmission identification

    Looks likee a t4 ? But also looks like Shifter comes out of taiil shaft ? I'm confused .... Clearly is not t10
  9. jakob stevanus

    4 speed transmission identification

    I'll add some photos after work today , thank you
  10. jakob stevanus

    4 speed transmission identification

    I can try to get somee today whaat best to take a picture of sides of I crawl under ? . I was under the impression that out of all 3 of those none had right rear reverse ?
  11. jakob stevanus

    4 speed transmission identification

    I have a 78 z28 with the original motor gone and a 87 -94 SBC 305 in it ( engine code 14093627 ) it has a 4 speed manual transmission but the shift pattern is 1,2,3,4 and reverse is far right and down . every 4 speed transmission I looks up for camaros none have right down reverse anyone have...
  12. jakob stevanus

    Performance street SBC build

    Makes sense. I would like higher. I will most likely do new flat tops pistons with like - 7cc to keep cr up . Thank you .
  13. jakob stevanus

    Performance street SBC build

    Ok I will buy the book before I get started thank you . When using the old valves in different ports they need to be lapped again for thee hole correct ?
  14. jakob stevanus

    Performance street SBC build

    From what I read about my heads 193 swirl they are 64 cc SO . I think the pistons are 12cc from what I can see online so that would bring me to 76cc plus HG ? Average 9 cc ? So 85 cc total ? So I would be at 9.5 now ?
  15. jakob stevanus

    Performance street SBC build

    Makes sense I guess I need to be realistic with my self mostly going to be a fun street car not much strip . I think I will try that set up you said first And I'll go with your camm and lifter / spring set up .230 @ .050 is ok with those heads and springs ? .also So I can port the bowls and use...
  16. jakob stevanus

    Performance street SBC build

    Waterloo area Ontario Canada. And don't really want to sink a ton ... Might try to use the heads I have. They look to be in good shape . If I disassemble to port the heads my self Cann I re use valves and get new spring with a camm kit . or should it all be new . If pistons and cylinders are...
  17. jakob stevanus

    Performance street SBC build

    Thank you
  18. jakob stevanus

    Performance street SBC build

    Thannk you makes sense . And specific cam duration and lift you can suggest . I think I'll have the machine shop make sure tolerences are good on bore and try to run .030 pistons maybe same ones but new rings if shop says they are good if not I'll go Mahle .030 with the small metric rings . I...
  19. jakob stevanus

    Performance street SBC build

    Is porting the bowls expensive for shop to do ? Of they will serve me well I can have them cleaned up Also I have engine apart now and have some photos of cylinder walls do they look ok ? I am new to these engines aslo looked like this engine is already .30




Latest posts

Top