Search results

  1. Floydwillweather

    76' Camaro Spindle

    Thank you, I keep hearing of bearing changes between these years, and just wanted to make sure before I go about the replacement.
  2. Floydwillweather

    76' Camaro Spindle

    Years of brake changes have stripped the threads on my stock spindles. I am wondering if a 1974 Spindle will be a direct stock height replacement, or will I have to attempt to find a used one. No retailer offers one that will not drop my front end some degrees.
  3. Floydwillweather

    Roll Call

    McDonough here
  4. Floydwillweather

    76 door glasses and rear window—Free

    Do you have any pictures? I'm down In McDonough and would love some new ones as mine are a little scratched
  5. Floydwillweather

    No start, Ignition switch?

    UPDATE: After replacing the ignition switch and the car still not running, I used a multimeter to test the continuity of the ignition circuit. The ignition wire (purple) had a short somewhere after the switch by the bulkhead connector. I could not find exactly where, nor could I replace this...
  6. Floydwillweather

    No start, Ignition switch?

    There is a second cable to the fender that I have recently replaced. The headlights do not dim at all.
  7. Floydwillweather

    No start, Ignition switch?

    So the neutral Safety switch has been off the car for some time, even my rear lights don't work. I am still working on that fix. The headlight do still work. I sanded down all the ground connections and re-installed them, so I believe I also eliminated that issue.
  8. Floydwillweather

    No start, Ignition switch?

    So I was driving down the road and the car randomly cut off. At first I thought It vapor locked as I thought it did the day before, but now the car wont even crank. I have taken the starter off and it passed the test. The battery is getting enough voltage as well. When I turn the key it draws...
  9. Floydwillweather

    Control Arm Grease Zerk

    Thank you all! I am going to look into what you said Corky. I have heard of the perils of the front springs, and a shop would probably be best for now. The power steering pump went out on me this morning, so I am headed to Summit, but this is definitely next on the list.
  10. Floydwillweather

    Control Arm Grease Zerk

    At this point I'd feel better replacing it. I know something on the front end is worn. The car has been squeaking for quite some time, yet I have been very apprehensive about taking it to someone since my last mechanic tried to brick the engine so that I would sell the car to him. Would it be...
  11. Floydwillweather

    Control Arm Grease Zerk

    They are bolted. I cannot understand why they failed to put a grease fitting on this one, or even why there is no place to install one.
  12. Floydwillweather

    Control Arm Grease Zerk

    Is there supposed to be a grease zerk on both Upper Control Arm ball joints? After numerous years of mechanics letting me down, I have begun to do maintenance myself and I am finding out that many of my zerks are missing. The right upper ball joint has a nipple, but not the left; simply a plate...




Latest posts

Top