Search results

  1. G

    4th gen bucket seats

    Anyone heard of or have experience with: 93-02 Firebird Camaro LH Driver Side Manual Tilt Seat Track Z28 Trans am SS
  2. G

    79 Z28 Project Fast Times.........

    Camaromurph, You OK? Haven't seen posts from you on your project for some time.
  3. G

    Holley Terminator X thoughts?

    Very nice and clean looking. My Handlebars create issues with any of the coil covers I have tried, when I get time and feel creative custom cove4s are on my “To Do” list.
  4. G

    Holley Terminator X thoughts?

    Sorry, Separator / Catch Can
  5. G

    Holley Terminator X thoughts?

    You may also might want to get an oil separator to keep the oil out of the intake system. There is a lot of “STUFF” you will be purchasing (nickel and dimming) so be prepared and take your time. Hope you have a heated garage.
  6. G

    Holley Terminator X thoughts?

    Not sure but the If you are also going for neatness get yourself various sizes of wire wrapping and shrink tube for ends. 1/4”, 3/8”, 1/2”, 3/4” and 1”.
  7. G

    Holley Terminator X thoughts?

    Almost forgot, would I do it again, ABSOLUTELY especially since I now know what I didn’t know before. As I said previously I do not have experience with other available systems to say otherwise. If I was going to turn it into a turbo car r with hardcore racing in mind the Dominator would be the...
  8. G

    Holley Terminator X thoughts?

    The issue I had was i couldn’t get it to idle correctly, it could have been my inexperience and having just started it w/o any running time it could have been another issue. Probably the most aggravating issue with the system is you don’t know exactly what is needed until you get to that part...
  9. G

    Holley Terminator X thoughts?

    73 with a 2006 GTO engine and 4L65E swap. Sorry for the long read. Since I was working and traveling heavily and the fact I am a newby to EFI I had a local shop install the package with the original modified electronics. The car was running with the modified BUT every time there was a hiccup no...
  10. G

    79 Z28 Project Fast Times.........

    Thanks for the update. You are an inspiration to those sitting on the sidelines. 25 years ago I had your energy and no time, now I have the time and no energy. Strange how that works.
  11. G

    79 Z28 Project Fast Times.........

    Been awhile since an update has been posted, are you up and running?
  12. G

    79 Z28 Project Fast Times.........

    Has the weather been keeping progress at a stand still? Anxiously awaiting your updates.
  13. G

    Ls swap pcv routing

    https://sdparts.com/i-19917265-genuine-gm-parts-12577927-ls6-valley-cover-plate.html?gclid=EAIaIQobChMI1da6_tC87gIVA77ACh1IYQVsEAQYGSABEgK4F_D_BwE
  14. G

    Ls swap pcv routing

    It would probably be helpful if you posted what you are working with. I read your postings multiple times and I know I’m blind in one and can’t see out of the other but didn’t see what you are working with. Pictures please. Do you have a vent coming from the valley cover or on the rocker...
  15. G

    Ls swap pcv routing

    Disagree, if you don’t have a fresh air source and an exit you pressurize the crankcase which creates another problem. https://www.ls2.com/forums/showthread.php/829128-Stock-LS2-PCV-routing...
  16. G

    Ls swap pcv routing

    The donor is from a 2006 GTO, not sure if your donor has the same small looping hose going from the valley cover to the intake just behind the throttle body. Remove the looping hose, hose from the intake into the separator/catch can and then the outlet hose into the intake behind the throttle...
  17. G

    Ls swap pcv routing

    No oil odor, the rear port of the driver side cover is the fresh air inlet therefore creates a vacuum.
  18. G

    Ls swap pcv routing

    This is what I did, here is a pic of the inlet (drivers side rear cover) with a remote filter mounted to the firewall and the hose coming from the valley pan to the oil separator and then into the intake.
  19. G

    Post up your "big wheeled" cars...AKA...17's or larger AND ADD YOUR BACKSPACING INFO!!!!!

    18” X 8.5 -5,5 backspace Tires - BFG G-Force Comp-2 A/S 245/45 ZR 18 speed rated 96 W - 26.7 tall




Top