Search results

The condition and price of your parts are amazing

You have some amazing parts, keep em coming

I had this same problem. The choke linkage next to the choke plate was binding. I bought a Holley carb spacer to go between the carb and air cleaner base, and this fixed it, so I would look there.

Protect the rear window with something that can take a hit from the torque arm just to be safe, maybe some plywood and a uhaul blanket.

WC

I had the same problem on my 72 with SBC and auto trans, what worked for me was to cut the flange at the exhaust ports in 2 places along its length. The first cut is between the #2 and #4 cylinder, the 2nd cut is between the #6 and #8 cylinder. The cuts allow the header pipes to flex...

Same thing happened to me lol

Did your car originally have power brakes or did you upgrade?

I looked in the 1946-76 Chevrolet parts catalog and didn't see it but I could have missed it

What is the part number?

not yet, I am still doing metal work on the body probably wont get to that kind of detail for a couple years

great, I will look

I am curious if 70-81 Camaro hoods have a part number somewhere on them that can be seen. I think mine is off of a 73 but how can you tell?

I made this myself using powerpoint

All great advice that I will use thx everyone first thing I am going to do is practice I have forgotten some of the basics of mig welding

Look at figure "E"

Did you weld in a plate to merge the new quarter to the roof? I plug welded mine and stitch welded it but now I am seeing a crack already and all I have done is jack the car up by the rear axle a few times see pic

I seem to be having the most problems when I try to butt weld, what is a good gap to have between the original metal and the patch, or should they be flush or should the patch go under (inside) or over? How would you create and then weld in the patch, would you overlap the metal to the channel...

I am running into a hurdle trying to fabricate a patch on my 72 Camaro at the upper left corner window channel of the quarter panel and roof where the two meet because of the opposing angles, see pic below. I don't just need to patch the window channel at the pinchweld but also have to patch the...

The difference may be with how the inner fender wells attach to the mounts by the 2 brackets, if yours mounts like a 70-73 I don't see why they wouldn't work. I replaced the ones on my 72 if you have any questions. If you look in the parts catalogs they may show this like #40 on the attached pic.