Separate names with a comma.
Spec on gear says .010" backlash
about .039 / .008 back lash
.010 backlash / about .037 shim
Brave! I have seen people flip their small blocks doing that
I just drilled a hole just like the pass side
I add it last. That way none of it gets dumped out the fill hole. I dump mine in from the cover fill plug.
Really, none. The tightening of the fastener should squeeze the ears together to have "light" pressure on the bushings.
The CEOs of Fedex and UPS are going to be making some huge changes I'm sure. I wouldnt stand for that! BS!
I bought the ford additive on Ebay for $7,
Also Autozone does sell the friction modifier, GM is going to be expensive
Depends on what you bought, Most do require the additive
Isnt there a company in Nashville that already makes these in an open market?
What is the difference in Quality of Welds/Strength
Arc welds Vs TIG welds ??
Yup the parts are only a few bucks from Lowes. You will not find a 45* on the shelf tho. Get a straight with a 90*. Just as pictured by Harbone....
This is what I did too, Bought the stuff from Lowes
Two reasons....Back then they were not as desired nor scarce, second is inflation. My wheels and tires cost more than what a used camaro would...
We aint stupid nor is Ford,
There is not a single person out there that owns a 350 horse pony car and doesnt "beat" on it from time to time...