Separate names with a comma.
Here is a good link
I have a 110 volt mig welder from Eastwood that plugs into any outlet, its perfect for sheet metal welding, its the 135 model. I had no experience...
You could do a small test section where it’s not real visible, then use sheet metal screws to hold them in place while the adhesive sets, if it...
Thx appreciate the help I’m gonna go for it, I will post the results
Anyone ever use their front sub-frame (removed) as an engine test stand? I have the sub-frame out of my 72 Camaro while I am doing metal work on...
This is true
This might help
Where in GA?
Or a bent rim
I had to replace the front portion of the drivers side floor board and half of the toe board, and back to where the EM brake cable passes through...
What is meant by "burping" the cooling system? How is this done prior to starting the engine?
Could also be an out-of-balance driveshaft
Has your rear axle been rebuilt or had a gear change recently?
It may be for a TCS solenoid on the intake manifold, or the TCS 20 second time delay relay on the firewall.
I have the same canopy
Mine had the same issue, I went ahead and put in a patch and its so much stronger now, no regrets. If you do what I did I recommend you get new...
Who sells the red oxide?