Separate names with a comma.
Sorry, I didn't take any pics of the brace and now the dash is apart after the mock-up.
All I did was cut 2 strips of mild steel 1/8"x3/4" 8"...
If you can figure out a way, locate your compressor and vacuum in an exterior closet. You'll be loving life working in that...
I'll just figure out a way to make mine fit and look better on final assy.
I already fabbed a brace that goes from the column support to the...
From Post #72 of "OER dash pad hell....."
"My NOS pad spent its life inside it's original box in an air conditioned building. It...
I agree, mine is exactly the same.
I'll look for a link where Npd talks about that, I think it was in a thread titled "OER dash pad hell"
That looks just like mine, I don't care for the fit.
I think I remember reading a thread long ago in which they said the NOS pad they used for the...
You may have seen this, if not you may get some ideas, I think I'll try something similar with my front x member. Most of the torque...
I read on Lat-g that you may make some changes to your torque arm.
Can you elaborate?
See edit in post #3 after math recalculation.
Again, depending on the look you want.....
I would go with a 275 on the rear and a 245 on the front.
The adapter is needed because a spacer that big will swallow up all your stud and you won't have any meat left to get a nut on.
It keeps the same...
You're definitely going to need adapter/ spacer, +56 is 7.45" backspace for the rear and 6.95" for the front.
On the back you could probably do a...
I think there's a market for at least one more!
Thanks for the movie...
Is that a Speedtech sway bar?
I'm really interested in your driving impressions with this set-up.
I've put off buying the torque arm because I just haven't seen much feedback....
My 71 has the factory disc/drum setup and although I plan some upgrades, I'm pleasantly surprised at how good they are.
^^^^^^That's how it's done.
I use a 7" DA to cut the All Metal, goes quick.
You're gonna have to help me out, not sure what bosses are?
The Stainless Works headers are designed for a 1" setback and they come with the plates.
They are very nice!
They hang just about the same depth...