Separate names with a comma.
If you have a welder, you can buy a steel "tee" 3/8" 3/8" 1/4", and weld the 1/4" port and then drill it out with a #67 brill bit which will give...
If you don't want to change the pump, you can add a T on the pressure side of the pump to carb line, Add an orifice with a 0.030" orifice and...
Would a Pontiac 400/455 Trans Am factory 4 core radiator fit? anyone tried?...
Here is my '81, factory paint #77 Maroon [ATTACH]
No, that was drilled for rust proofing
I had a look at that, I already have the SPI primer and activator would hate for it to go bad
I have everything welded in. My next step is apply SPI Epoxy primer, Since I do not have my big compressor & air lines plumbed I can not use a...
Trans am did come with 2.73:1 and so did some camaro’s the only way to know for sure is to remove the cover and count the teeth or read the number...
The more that I think about but your right, I went ahead and ordered both stainless steel lines, my factory lines had better days if I cut the...
this is just a regular TH350 , no lock up converter
I'm going to be installing an external transmission cooler along using the rad cooler, I'm planning running two -6 PTFE braided lines, I would...
the threads are 1/4-20 [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I'm going to buying a Crush sleeve eliminator kit, there are many different brands with various shims, which brand would you guy's recommend ?
I called Yukon and asked what size the heads are on the bolts that are included in the kit and they said 3/4"
The master rebuilding kit includes, pinion & and Carrier shims, is this enough or should I buy an additional shim kit?
I found the Master rebuilding kit; https://www.summitracing.com/parts/yga-14088/overview/ since the kit does include, axle bearings and seals,...
Thanks for the reply, what installation kit would you recommend part #? lots of kits that I've been seeing include the incorrect ring gear bolts,...
I'm looking to make a poster for my garage of my Z in front of GM Van Nuys assembly plant, I found some pictures of 3rd gens in front of the...
Do you have any of the flange nuts as well?
I'm looking to rebuild my 10 bolt 8.5 and beef it up in the process; here is a list of parts that I currently have for this build; - Moser 30...
