Separate names with a comma.
don't touch the paint! it looks awesome get it sealed up with some clear and enjoy. Love this project and the family ties with it. I would...
Is the regulator adjustable? I wouldn't worry about a difference from 58 to 65 psi, the ls ecu will be fine within that range and the engine...
Holley makes a two stage pump, but I don't think you really need it. This is the pump I use on my Camaro and have used in another EFI BBC set up....
Is there a link?
In regards to the fuel pressure, if you build a new system, with new injectors, pump, ECU, all of that will be built around a 43-45psi rail...
let it eat. I prefer to break in on the engine dyno at my engine builder's shop whenever I can You'd be more likely to hurt it driving around...
Welcome to NastyZ Something to keep in mind with the LS based stuff, the oem fuel system operates at 60 psi. Most efi system and aftermarket...
Exactly Fbird, I typically over size the injectors/fuel system in order to run a shorter pulse width and phase the injection timing for best...
Any true stand alone efi system will handle boost. Its dependent on the sensors you use to send the manifold pressure/vacuum signal to the...
Beehives are great, those springs will handle more cam if you wanted
Agreed, probably need more than 5 times to do it right.
was this the carb that was used on the dyno? If so, I wouldn't touch it. That plug looks fine, for the driving/load you described
a properly tuned EFI setup would solve the issue
I think you will need more
I've had a 6al go out, after burning two boxes and an ignition driver in an AEM ems. Tracked that problem back to crappy wiring by my room mate....
ECU IGN Line Lock Data logger Starter button
Smith Racecraft does really nice work, I use their offset shackles. 1.38s 60' on Caltracs here, btw
Awesome build! I predict you will need to keep rear tires on hand.
very nice, Fuzzy! My car is a BBC/TH400, 9" w/4.10's. 3315#'s with me. There is a lot of pics in the 'project' link in my sig. I made...
Most of the tracks in N Tex are 1/8. One 1/4 and six or more 1/8mi tracks within a couple of hours drive. The car is geared for 1/4, but most...
