Separate names with a comma.
I do my best to avoid getting under any vehicle with just jack stands as well. You can leave the jack under the car with the jack stands for...
+1 for Ron's Machining Service and AAM gears. I bought an open box differential for about half the price of a new one from them on eBay (not...
When I still had my 3rd gen, I had nothing but weird troubles with Spectra modules, so I got an ACDelco Original Equipment one which also ended up...
I bought some Mylar ones because I was tired of any water on the roof dripping directly on me. They're okay, but overpriced for what they are IMO....
You can definitely see that the idler arm is twisted up and is swinging the center link down. It should be parallel to the pitman arm in the first...
It works nicely. I honestly don't know if I can tell any difference aside from the pressure relief being 70lbs instead of 60lbs (it includes a...
I have a 1975 Firebird with a 1-piece RMS SBC 350 and Canton 15-242T oil pan. It has 6 quart system capacity and Canton says it's good for a 3.75"...
They look a lot like the Procar brackets: https://www.summitracing.com/parts/sca-81178/make/pontiac/model/firebird/year/1975 That's uh......
I think I might see your issue unless it's distortion in the pictures... the idler arm and pitman arm are not parallel. The idler arm is at the...
That would be pretty nice. I had a Subaru BRZ which had vinyl on the bolsters and a micro suede or Alcantara for the center sections. It made...
I read about cutting off the extra holes on the Scat sliders to lower them more, but if it's still any higher than stock then it's probably too...
Pretty sweet deal! I notice the Lunati I have has 6 degrees of advance built in (112 LSA & 106 ICL) but most of these other similar cams are more...
I would vacuum test the modulator vacuum line at the carb before fiddling with anything underneath yet. Make sure it holds vacuum. No or low...
Hmm, I ran across someone talking about Wedge brackets when I was looking into this last time. But looking at Wedge's website, it says they only...
Curious what you go with and how the seat height works out. Pretty happy with my 4th gen seats but they’re clapped out and the wrong color. I bet...
Weird... I switched my Firebird over to the same 3964881 pitman arm and a Proforged 106-10066 center link. [IMG] [IMG] Wonder if Speedtech...
Couple Pro-Flo 4 threads here from this year: https://nastyz28.com/threads/edelbrock-pro-flow-4-install.328699/...
Curious to see if you notice anything! Not particularly fond of valve train noises either. I think I have almost the same cam too -...
Shiftworks makes kits for relocating the neutral safety switch (which is also the reverse light switch) to the shifter if it's not already there....
They are rubber. I think they're the 70-73 size bushings? Very happy with the arms. Hmm, gonna have to give them a call about my g-braces then....
