Separate names with a comma.
Try sending a message to MP81 , asking for a pictures.. He just did a rebuild and adjustment of a CCC carb he might have the pictures you need.
That's 70's Show was supposedly set in Point Place , Wisconsin , which was a fictional place.
Is this just outside of Point Place, Wisconsin?
Respectfully , I disagree with your statement, increasing M/C bore size reduces line pressure given same stroke and force input. Pedal ratio are...
I know it sound backward but l believe a smaller bore increases line pressure.
https://www.ebay.com/itm/1979-Camaro-Rear-Window-Defroster-Harness-With-Timer-Connection-Dash-Side-EA/352820545639?hash=item5225be4867:g:eVIAAOSwkb...
Here is a quote from a Lars Grimsrud's article, page 8 also the link....
If you have the number of the carb, could you post it . You said it was off a 454 , it could be a 800 cfm model , just curious
Go to ebay , type in 1980 Z28 Brochure , they start at $6, might work. In any case it is cool to have.
Seller assumes all responsibility for this listing. That is stated right on the auction above revisions, which shows the reserve price was...
Something to think about if your FICO scores are in the 800's , closes it and dont think about it. Like stated above , might drop but will bounce...
Your vacuum gauge also has a fuel pressure scale
Okay, That is what I found on internet , also found that some "new" fuel pump put out too much pressure. Like 10 psi instead of 5-6 psi. Didnt you...
Lightly cupped, that sounds like float level too high could also be debris under needle. Did you change fuel filter? Did you look inside the...
You can try to see if power piston is moving by place a light piece of tubing or a straw thru the hole in air horn in front of choke flap, it is...
That was my thought also , plus I hate giving up on carb issue
That good , when I did my carb years ago that adjustment was like top secret information, could not find it any where. How about the needle and...
This is the APT adjustment screw [IMG] The APT is the part that the needles are on , it needs to move freely up and down. Vacuum pulls it down,...
If you have time today , try a different manifold gasket like the one pointed out earlier. Your carb has a APT that needs vacuum which it get thru...
If any of the cruise control vacuum lines are there , check them for crack or leaks. On the carb, most quadrajet have a vacuum port on base plate,...
