Separate names with a comma.
I'm looking for the part that bolts to the ports on the AC compressor for an LT1 out of an Fbody. I need one that comes off the sides and not out...
I know this is a little older than 2nd gens but I'm not a part of any 1st gen boards. I'm hoping someone might be able to help all the same. My...
I'm fighting a vibration issue that comes in right about 60 mph. Without going into all the troubleshooting I've been through, let's just say it's...
I've swapped out the factory fuel tank on my 79TA for a Tanks Inc EFI tank. Some where in my build thread I have pictures. The tank does leak a...
I'm getting close to putting together my LT1 stroker engine. Just going with a simple 383 topped with Advanced Induction 200cc LT1 heads along...
I have these as extras from my exhaust system build. It's a pair of universal muffler hangers and a pair of Fbody tail pipe hangers. They are...
I realize this is not a 2nd gen but thought since it was a camaro it would be ok to post. If not, please let me know. This car is owned by a...
Composite monoleaf springs I bought these from Keith at Custom Works a year ago now. Only got them installed earlier this fall. Springs have...
One of the reasons I am building a new rear for my car is that the previous work done to the housing was shoddy and incorrect. Because of this, I...
I went ahead and picked up some main cap studs from Moser for my 10 bolt. They don't list the torque for the nuts anywhere, website included. Does...
I've tried doing a search for this without luck. I have found that people don't like Ratech brand though. So, that brings the question to what...
Just like the title asks. I'm interested in hearing what changes you feel are necessary to make an 8.5" 10 bolt go around corners reliably. My car...
Parts are gone. Thanks These are the parts I took off my 79 WS6 TA while doing the monoleaf and coil over conversion. I honestly don't know if...
I'm trying to find someone I can trust to do rear end work. I'm in Atlanta. I'm needing someone to do such work as straighten a housing and weld...
If anyone needs or wants some pictures of what the coil over conversion looks like or entails, head over to my build thread linked below. I just...
I've just finished up the coil over conversion on my car so I'm selling what I took off. I have a set of Koni classics. They are probably 6-8...
The local CL has a guy selling both a Scat forged 4340 stroker crank and 4340 Eagle 5.7 rods. I'm trying to verify that these parts will work in...
I remember for the longest time that Spectre only had an early EFI tank. Well, I was looking today and they have one for the late 2nd gen cars...
I did some searching but wasn't able to find what I'm looking for. I'm hoping some of you with the system can help. I'm really interested in the...
Bought these and then changed my mind and decided to go through the floor with my connectors. There's nothing wrong with them other than a couple...
