Separate names with a comma.
i think repro mats are fairly cheap and look spiffy. But theyre not as cheap as the piece of carpet i grabbed out of a car in the junkyard! It one...
wiper motor wiring the diagram i have has a light blue, a dark blue and a black wire going to the fuse box. Spots 14, 15 and 91 respectively.
thank you Got it working. All connections were ok. It was a bad tach unit. I think i fried it years ago, the last time i tried messing with the...
I hooked up my factory tach using the direct wiring method, 12v, ground and HEI signal. I actually have a spare cluster that i tried first to see...
bolted up well, I just pulled the TC a little bit forward and bolted it up. It seemed to bolt up nicely. I dont think i pulled it too far out of...
ok thank you for the reply. alot of that makes sense. I just didnt understand why there was so much talk about spacing (using washers, spacers...
ive done some searching and im totally confused. Im trying to install my flexplate to the torque converter. When I installed it last time I didnt...
preskit im in prescott i know jack poo about body work, your welcome to come look at the car thou.
I have one BFG t/a radial for sale. It is in the discontinued size of 275 50 15. Check your tires. If you want a spare for the future this size is...
the hoods all have what is basically an 8-way adjustment. You can see by the slots on hinges that loosening the bolts on the upper hinge arms...
[img]printed circuit TACH thanks for the pic, ive reposted it. I used this direct wire set up and it works.
so basically I need to isolate the new connections from the printed circuit? so taping the screws to isolate them..is that how it will work? thx!
you guys know if theres a way to use the factory tachometers without running through the wiring harness and printed circuit? I read on another...
thanks again for ya'lls quick help. We gotter goin today! It was all timing. Good info here on cylinder washing and valve spring tension. We found...
the alternating "popping" is the exhaust coming out of the header collectors, so its firing on some cylinders at least...I hope the cam is in time...
so ive got my rebuilt small block (recon'ed crank, new cam, new heads, rebuilt carb, etc, etc.) all set up in my camaro. We've got it to where is...
I thought it would be helpful to consolidate some info Ive recently read concerning fuel tank venting, fuel return lines and the charcoal...
I was troubleshooting my taillights the other day and noticed a third bulb that mounts in the taillight assembly--in addition to the reverse and...
You dont need to remove the carb. Direct from the manual: To properly adjust the floats in the Eddy carburetor, first, remove (eight screws) the...
UPDATE: I have removed the air pump, air lines and smog tubes. I plugged the four exhaust manifold smog-tube ports with brass fittings from NAPA....
