Separate names with a comma.
Just did the same20200317_192129 by camaro454 posted Apr 24, 2020 at 4:56 PM20200314_140551 by camaro454 posted Apr 24, 2020 at 4:56 PM
How would it all of a sudden get to fat?
Yes wires are correct. Haven't done the dark test but they are new wires. everything was fine I hit nitrous a couple times with no problems no...
Tried new dizzy didn't help. I haven't found another ignition box yet. Whats weird is it starts perfect idles perfect but only misses under load...
Gonna try another dist. and ignition box wish me luck.....
OK pulled the head and intake piston looked good valves look good replaced plug wires. When I rev it in park it revs fine starts great but when I...
Any body ever use these guys in E-town KY???? http://brangersracing.com/
Any one here ever use Brangers from E-town???
Who does roll cages here in central KY??
Yeah I was there...
Changed plugs still didn't help seems to surge a little when in gear and light throttle. Gonna check push rod and springs make sure neither is...
Iwouldnt worry so much if it didnt miss so bad. Check plug wire it was good guess ill try changing my plugs..
Just did a leak down test on #2 and you could hear just a small amount of air coming from breathers on valve covers, compared it with #1 cylinder...
Did a compression check and number one cylinder is 180 and the cylinder I thought was bad is number 2 and its 175 does this mean my rings are good...
I would like to make 800 to 900hp or more on pump gas so im guessing a blower is needed its gonna be a street / strip car. just here around town...
I dont need a procharger but could I build it to have 800hp or more and add procharger later. Give me some combo ideas for say 800 to 900 hp.
what would the best bottom end be to use as in crank rods and piston? Gonna use a dart block heard callies cranks are good some JE or SRP pistons...
lookin to build a 800hp 540 with a procharger should i build the short block myself or get one from someone like steve morris.
Guess Ill just have to pull it out and see....
Replaced cap pick up and reluctor gear and i still have a bad miss I can unplug #2 plug wire and it doesn't change anything. You guys think I...
