Separate names with a comma.
PTFB makes all new intermediate shafts and you can choose the end you want on it. Its shown right on the home page. www.pro-touringf-body.com
Not on the inner fender. There is a slight sway bar rub, but can't even feel it at speed. They do not stick outside of the wheel well.
does your tubular lowers have improved geometry for more caster? If so, the hubs should be centered in the wheel well and you won't have any...
I have a GM cam from the FastBurn 385 for sale Lift: .474” intake, .510” exhaust Duration: 208° intake, 221° exhaust @.050” tappet lift...
I ran the Bridgestone RE-71 in a 275/35 and now the Yokohama A052 in the 265/35, although they're basically the same size physically. You should...
I'm running that pan with a 1 piece felpro gasket and cannot get it to stop leaking from the front and rear. Did you do anything special when you...
Yes Sir, they are the PTFB spindles. New castings, bigger later year bearings, 8* KPI, and improved Ackerman. They can also be ordered already...
I have run 275/35/18 on a 9.5" wheel w/ 6" BS on the front. I did not have to modify the inner/outer fender at all other than I use pan head...
yes I did. I also beat on the seat belt humps a little, it was rubbing during cornering. I believe the BS on the rear is 5".
I have 6" BS on my 18 x 9.5 front wheel. I have aftermarket everything up front for autocross, but not sure you'd need it to prevent rubbing. I...
bump
Box is unbelievable difference from the Iroc box I had when I had the 12:1. This one is 8:1 and its even better. You're not going to find a new...
Yes, it's a 670 box I got from PTFB. I bought right as the boxes were skyrocketing in price. I'm not even sure he can get them still, but its...
I appreciate that. Thanks
GM Serpentine Front Accessory Drive Includes brackets for SBC, Saginaw PS Pump, custom PS hose for -6 AN into steering box, Long WP, AC Delco...
I just recently upgraded to Jones and I'd highly recommend going with their stuff. I drove up to their shop to pick up my stuff and they spent...
A bigger front sway bar will make the car push more. Less weight transfer to the outside tire means less grip. Putting a rear bar on matched to...
I was sitting in the trophies after morning runs day 1, but I think we overheated my RE-71s in the afternoon. It felt so greasy and I ended up...
Good write-up. I think I remember talking to you at CAM East last year.
Once you've done it a time or two, most autocross layouts are very intuitive and easy to follow without getting lost.
