Separate names with a comma.
I'd first check with my local electric motor repair shop. Had a motor go out on a Cmpbell Hausfeld compressor right in the middle of using it to...
I'm with the 2 x 4 crowd. I have one 8' bench, 4 x 4 legs on front, 2 x 4 frame for top with additional 2 x 4 spaced about a 16" apart under a top...
I second Twisted's advice, heavy gauge steel posts, sunk in concrete in sonotubes. I don't have to deal with a frostline down here in Fl, but all...
Looking good since the last time I saw it, has to have been 3 years, I've been wondering where the heck you were! Maybe when this whole Covid...
You cannot compare wattage, that is energy consumption, of course LED is going to be less, you need to compare Lumens, for less wattage you end up...
I got 7 LED's at Sam's club for about $26/each and went nuts, 2 over my 14 foot workbench, 4 on the ceiling, and one on the wood rack that hangs...
Running the alt output to the starter screws up the voltage sensing circuit. The alt out put and the voltage sensing wire from the alternator in...
Can you use one of these adjustable brackets? I have one on my car works fine....
I used a piece of 2 x 4 spanning across fenders (thick rags between fender and 2 x 4) then a piece of chain to rear of engine and wrapped around 2...
I have the same misfire going on with my car, going to have to take a look at this on my MSD wires.
I'll second the Hobart with grind/weld switch. Think I paid around $80 for mine and other than swaping batteries out never have had any problems...
The rolls used to come in a 5 pack, you had to pull them apart....I can't be the only one who tried hitting all 5 rolls at once with a big hammer...
I take it you are trying to figure out how to drill the holes for the flex tube or whatever it is called? Back in 1980 when I was putting speakers...
Pretty simple system, knob + cable + f;apper door. Easy to pull the pass side kick panel, door sill plate comes off, then a bunch of phillips head...
Hobart makes a nice 110V welder. I tell you, I wish I had bought one a long time ago. I even fixed the metal rack my wife uses for turkey...
Friend sent this to me years ago, some interesting facts: TOP FUEL FAST FACTS * One Top Fuel dragster 500 cubic-inch Hemi engine makes more...
DSE and Speed tech are not site sponsors, I always try to give my cash to one of the companies that help keep NastyZ28 running (check sponsor...
Jacksonville, been down to the main street cruise in in New Smyrna, lot of fun. had about 4 or 5 Nasty members get together.[ATTACH]
I think I paid around $89 for my 10-22 back in the 80's. Think I just spent 4 times that upgrading it, new stock, new bolt, new trigger, new...
Grew up on WMMR (93.3 isn't it?) WYSP is gone it seem, and used to listen to I think it was WIOQ 102.1 in Philly which had more progrock on in the...
