Separate names with a comma.
Number one for me is a quality stabilizing hitch. I have a blue ox which is used by many do to the reasonable price. I pull a 25 ft trailer and...
You could use the 2 original inner bolt locations that mount the bumper to the inner structure to mount a plate by using longer bolts. Then just...
I always use a large dull flat bladed screwdriver or a drift punch with an end as wide as the tabs.. The tank collar usually has an expanded end...
Another note I took these measurements across the top of the hood which could slightly affect the measurement for the middle and fnt of the hood...
Back wing tips 57 7/8, middle 56 5/8, front 55 5/8 The middle is plus or minus a 1/16 depending on where you consider the middle. I took a front...
I had a local hitch shop install a receiver hitch with added bracing to install the winch into sure makes it nice when pulling vehicles up on...
Don't know if you still need the measurement but it's 2 9/16 inch from the front of shifter base plate to the center of hole.[ATTACH]
Have you tried to to stretch the fender down by installing shims at the bottom mount area? Sometimes its it hard to get the necessary number of...
My experience with many repop panels is that the dimensions aren't correct, usually they are longer (oversized) than the original. From what I...
My original floor pan in my 70 has virtually the same wrinkles with no signs of damage anywhere on the body of the car.[ATTACH] [ATTACH]
I would lightly snug down anything you install because it will take multiple adjustments to get it right. Everything you move or adjust will...
PM sent with tracking#
Would you pm me your shipping address.
Yes, its for sale. PM sent.
Not sure what year uses what, but I have the one pictured if that's what your looking for.[ATTACH]
If you'll do an internet search for transmission line clips I think you'll find what your look'n for.
The ball valve models usually work fine, I've used the 80 lb model for many projects, Use the fine media and the appropriate safety gear and you...
Take a look in the project progress thread at secondgenaddict 73 rs lt z/28. He has a good pic of the firewall of his car. His thread is on the...
Probably best course of action is to determine the actual screw size and see if you can find one that has the self tapping feature and use it to...
You guys are correct it is not a 7/16, I should have double checked the size, being that it is basically a sheet metal screw, conventional thread...
