Separate names with a comma.
LOL, that was a long time ago! Thanks to you I was able to get my car registered in PA. :happy:
Just to clarify, my friend didn't do it, he had it done. I could post the website but I'm not sure if I'd be violating forum rules because he is...
No, it was printed from actual pictures.
A friend asked me to email some pics of my car to him, not saying why. A few weeks later he gives this to me. Pretty cool!! I like it a...
I've had good results from them also.
+1 I've known Dave and Tom for years. Good people to deal with and knowledgeable.
Have you figured out the problem yet?
Did you put the seat back in before the bottoms?
You have to push rearward and downward with force to engage the forward latches on the floorboard. I'm assuming these aren't connecting.
[ATTACH]
You shouldn't have to pull the engine to remove the smog stuff, unless you're going to rebuild it, which wouldn't be a bad idea! Anyways, good...
That makes sense. Glad you found the problem! I wouldn't replace the EGR. Heck, I have one I could give you if you were close by. Just block...
When you rebuilt the carb, did you match the new gaskets with the old ones to make sure you had the right one? Most kits have 2 or 3 gaskets for...
If screwing in the mixture screw all the way doesn't make a difference then I think you have a problem with the screw or the circuit.
Turn the idle mixture screws in one at a time until you hear a drop in rpm and then back it out 1/4 turn. Then do the other one. Then go back...
That gasket does not look brand new to me. How was the float when you took it out? You need to clean or change the needle valve and seat also....
Well if all the electrical checks out then I would lean towards the carb and a float problem. The needle valve may not be regulating the fuel...
Did you adjust the timing and possibly not tighten the hold down bolt and the distributor moved? I'm just wondering how something could change so...
check the distributor cap for cracks.
Could be a bunch of things but my first guess is its electrical. Pull all the plugs. They should be a tan color but if one or more are black...
