Separate names with a comma.
Nice!! Exact same set! I just sold them, they definitely deserve to be on a original engine bay set up. My engine bay is a race set up with...
Do you have an MSD ignition system?
thanks guys! Think they're worth anything? They gotta be vintage. I searched the internet and have found nothing relating to these
Posted them on ebay if you're interested
Cleaning out the garahe and came across these that came with my original motor. I know they are not period correct for my 71 but was curious if...
I did find most of the parts, didn't find the retainer clips for the cap of the lifters, should be in the oil pan now. I would say that the...
Think I might of found the problem. While redoing the valve lash I got to cylinders 6 and 8 intake, backed the nut almost all the way off and...
Well, out of time this weekend. Got everything back together and ready to start setting valve lash and check for any intake leak. Got a friend...
Compression test results came out pretty good, between 155 and 160 psi on all cylinders. Re-torqued the head bolts and got about 3/4 to a full...
Fan clutch. After taking mine out I found out that there was no bimetallic coil on it. So I installed the one that my buddy gave me. Then the...
I did that before I installed it and it was fully open around 170. It is a Stewart EMP-300, 160* stat. Today I notice it runs around 180 highway...
This was the longest drive I have taken it on, about 30 miles. It just doesn't make sense with the temp change like I said. You think I should...
Today I took the car out and on my way home it started to climb in temperature from 170ish to 195. On my drive to my destination it ran around...
Mine is also a 71 with standard interior, with no wood grain.
Mine is broken where the inside cable hooks to, but what I am pointing to is a clip that the cable housing is attached to and that screw down to a...
Check out post # 2 on this thread. Exploded view of each style wheel. http://www.camaros.net/forums/showthread.php?t=116177 Or check out this...
Got it all figured out thanks to hoov81, :cool: that guy knows his shtuff! The ones I pictured previously are for deluxe interior, with wood...
Does anybody know where i can find the bracket for the armrest on the front interior door panels. It is the bracket that mounts to the door and...
So does anybody have pics?
What's the proper way to check the frame while installed but with out the engine or front end installed?
