Separate names with a comma.
I am using my old seat belt light as an idiot light, I ran power wire to the light then light to oil pressure switch and in parallel with high...
I just wondering about building a 396, it is a street car no racing, but I want good bottom end acceleration with a some what heavy car 3650 with...
Is there any real advantage to building a 396 sbc with the longer stroke, does the cost of 900 dollars which include H rods and a forged crank...
looking very nice
If my budget would allow it I would build a 427 sbc,
There is no replacement for displacement, if my heads better I would see what I could build with more displacement.
Hi COPO reason for dished pistons I do not want any chance of detonation
The pistons that come in the kit (1-90510BI) are 4032 inverted dome piston # 930210840 6 inch rod, -16cc crown volume, 448 gram weight and a 9.7...
The Mahle pistons are made with 4032, what does everybody use for file fitting the rings
thanks for the feedback
You are right not 1/16, never checked the ring size that comes in the kit
Deck height averages around .025 checked 1979, part numbers are Scat rotating assemblies. These are internal balanced kits
Hi COPO do you have aluminum heads, I just looked at your page CI heads also looked at cam
I am running 1979 Turbo/292 heads, with 66cc combustion chamber, ports have had some work to improve flow. I am using a Victor Jr gasket matched...
I need help deciding on which 383 rotating assembly I should buy, My Camaro will only be street drive and no power adders Gasoline in my area is...
I went to the land fill one day, did it stink, there in the drop area was a sturgeon about that size just caught and dumped. To bad fisherman was...
No AC needed here in Grand Bay-Westfield NB 44F
looking very good
thanks for the information