Separate names with a comma.
drill a tiny hole on the inside to vent, just to avoid starvation and negative pressure
and how is supposed to look at the end with complete racing stripes and the fuel cap
and the end result, I still need to make the fuel door which is going to have an aluminum filler cap on the outside
made some filler panels for the rear to change my tail lights to two round halo led lights with blinkers and stop lights, the reverse is a small...
I use rustoleum and within an hour clear coat it with spraymax 2k, it is like using a two stage automotive finish that will last and looks great....
silicone or armor all, you have to get rid of most of the paint and clean with solvents and repaint
When re-wiring my car I used modern breakers and if they sense a short they disconnect, you correct the issue and just re-set, no fuse changing or...
it's probably the switch, you can just put a little wire jumper from the yellow wire to the light blue wire at the harmonica so all left...
hydraulic e brake
I recently made a new dash for my 78 and installed a start push button, it comes with a relay box, that powers a large starter solenoid that I'm...
more electrical stuff
Yes I Like the results of working with fiberglass but not the process as it is messy and itchy, I have a fiberglass vendor that makes my fairings...
I'll dig some pics, basically I made a paper pattern of the curve where it will mount to the remaining metal part of the dash near the base of the...
Progress on the Camaro project, dash almost done, wrapped/upholstered, 3d printed idiot lights for PRDN12 above main gauges and 3d printed idiot...
Here is mold fresh out of the buck and ready to be cleaned polished and splash the final dashboard
this week , i removed everything under the dash, the remaining ac stuff, the cracked and sagging dashboard, all wiring, the remaining ac stuff on...