Separate names with a comma.
That dome piston in the photos from post 15 look like cast silvolite pieces.
Did you check the timing mark on damper with TDC at the piston before installing the heads? If not, you can check with a piston stop thu spark...
Are these folks worth dealing with? I'm looking for a grill, head light bezels and parking light lenses. 1979 black z28 stuff.
I put a volt meter on it and went for a rip. 16.5V at 6500. I had another alternator and it will not go over 14.4V. I'll put a...
Both head lights burned out low beam at 6500 rpm. They went real bright and flickered twice, then out.
Use following link Comp cams 268H and click recommend components. At the bottom are two valve springs. click on the red part number to find spring...
Comp cams does mention it, look at the cam card. If the aftermarket heads came with dual springs, you need to change them. Not one SBC came with...
Also, roll the car back and forth 20-30 feet and it will settle some.
You shouldn't use dual valve springs for a 268.
Just a piece of advice, do not let the lady boss find that coffee can full of receipts.
How much timing were you running?
When do you sleep?
Ran across this on youtube. Found it interesting.
Hey COPO. do you have a part number or link to the Accel can with the notched cam limiter? I used to buy the Crane one like that. I have not been...
AutoMeter 3224 oil line kit
Maybe the starter is dragging internally as it is not kicking back.
You can tame the gauge down by use a smaller inside diameter line.
Inertia is the same in either direction. Don't worry about it.
I've been using that one for awhile now. Many blank stares with that one.