Separate names with a comma.
So not many parts left to install.
Anyone know where this clip is from ?
Didnt get much traction on this over in the brake section so thought I would give it a go here!
The off-shore booster I was given has a...
The off-shore booster I bought has a non adjustable pin and appears to be 2 and 9/16 long
(including nub on inside end of booster)....
Used to be a fellow from Indiana ... "Dennis" that did a nice job on the brite dip coatings for the window and rocker moldings.
Do we have any tag experts that could help me decode this Rad Tag?
Just put my carpet in and discovered I was missing 1 of my 4 carpet tacks.
Sounds like a silly thing but... no suppliers I spoke with...
Are the bolts that secure the diff cover on painted black or natural steel?
So... what is the story on the factory as delivered valve stems and the extenders that came with the factory Z wheel?
So much conflicting info!...
So the rear seat divider that goes between the seat back ant the trunk has 2 sides.
One is the black side and the other is the jute...
I searched around the forum and sent a bunch of PMs out trying to solve an issue regarding my seat tracks resolved.
The front rollers and guides...
I am going thru the parts boxes trying to find my bucket seat retaining bolts.
I am convinced that the originals were never present....
Has anyone had any experience with this online auction ?
I noticed that Hagertys seems to use the...
I am looking for info on the alternator fan.
I have the correct nut,wavy washer and pulley.
I am unsure on what is correct fan wise...
Looking for a recommendation for replacement outer axle roller bearings.
The replacement units offered are not the same as GM originals....
Just a curiosity check taking place.:confused:
I cant remember seeing one of these in the past... why the notch?...
Looking for a 1 inch wheel cylinders as an upgrade for my 70.
Anyone have a part number?
Does anyone know where a pair of rear leaf spring isolators can be purchased?
Looking to replace the 9.5 rear brake backing plates as the anchor pins will be time consuming to restore.
Are there any sources for some...
Cant seem to upload any media on the nasty site.
Is there a fix or???
I have a balancer that was purchased for a 454 engine I had years back.
I upgraded to an Eagle Rotating assembly and as that engine had...