Separate names with a comma.
time to start posting up some pictures again here and show more updates
Below are the instructions right off TRZ site. Mine were set at ride height before adding installing the motor.
11. When adjusting for ‘bump...
Sorry for the delay in responding.
Rack is set up to slope downward toward tie rod. 3/4-1" if I remember.
Ill try them as well.
Ugggg makes me sick to come here and not see a pictures!
Motor finally made its way in and actually had no issues with interference of the rack and pinion or the mid plate. Something finally went easy....
My stock power steering box arm didn't work so I had to order the correct one from jegs.
This will bolt right up complete with new rag joint as well.
Need this gone.
Price drop 225.00 shipped
The plug that connects to the hi/low beam switch has 3 wires.
green goes to high beams
tan goes to low beams
where does the blue wire connect to?
Like the title says its a Borgeson 357 box that was bought and used for mock up
then decided to go with a rack and pinion.
I also have a brand new...
Motor back from machine shop. Got some minor things to do to it then get it in there.
Final assembly of motor almost complete.
OK got it figured out I think.
outside lenses are:
black(ground)/Brown(park)/yellow(L) or green(R) are turns
inside lenses from what I see are:...
I have 2 white sockets(1 has 3 wires and 1 only has 2 wires) I also have 2 black sockets which have 3 wires each in them.
My thoughts would be...
First question is its been forever since lights were installed so which ones are for taillights and which is for brake lights/reverse?
Got the wood burning stove all hooked up and fired and almost ready for winter.
I still want to install a heat reclaimer, but at least I wont need...
Progress on the motor has been a struggle waiting on parts and finding issues with parts I already have.
Both heads needed to have o-rings welded...
They are spot welded to the quarter and trunk pan.
Since your just installing a new one grind/cut it out.
Try following these steps.
You didn't mention rear gear and trans ratio.
With these tires you need to kill off torque and they seem to...