Separate names with a comma.
yup tach lead
well i dont know how to fix it, but i gotta say i thought ive done some pooty work on old beaters but that has still got me beat
i had to give my 78 a "stomp" to get it open, works awesom now, even better than the driver side
wow this is old, the pic apears to be a push on spade connector, your best bit would be to solder and shrink tube the terminal on to the purple wire
thoes tires are still have way too much tread on them ;)
well thare was alot of just absoloutly junk a poo load of clothing and just generally not alot of automotive parts, and what was thare was priced...
thare are also heat shrink hose clamps aviable aswell
Ok thanks for the info
early 90's chevy truck block, i know that some of the 90's blocks are fitted for roller cam setups. so is thare a way to tell without pulling the...
here in centeral ontario looking at roughly $5 per gallon cdn$ so its like $5.10 USD, just for comparason purposes
ill probably run the king of the hill at barrie speedway right next door to the swap.
hey burls creek swap meet is on this weekend, whos going?
turbo 400 is all mechanical so the ecm wont have anything to do with it, your best bet would be to find one for a truck with a manual transmission.
i wouldent count on the roller setup to work on the 92, some of them were set up to run the roller cam but not all of them
ya what bondo said lol
umm dumb question, whare dose the front drivers corner of the carb bolt to???
theyre just 1/4"x 20 bolts, i dont remember the leingth of them but i just went to the local hardware store and picked some up, toss some 1/4...
i dont know if they have napa in denmark....
well that was an extreamly fast reply thanks for the info. did you have to go to any specialty tool supliers for the tools?
well pritty basic question, what if any special tools are required to tear down and re-build a 700r4 from a 88, 89 ish chev pickup. and are they...