Separate names with a comma.
Since the heads have been sitting stored for over 10 years would the valve springs have lost pressure/strength? Also would the valve seals have...
I already have all the parts and the bock is machined and rotating assembly internally balanced. This was all done about 15 years, ran into money...
Thanks, thats good to know.
The intake ports match the felpro 1205 intake gasket.
What intake manifold would you recommend I run? It seems like with my cam and heads I could go with either a single plane or a dual plane.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
These are some pics showing some of the porting work
Most of my driving will street driving
If you are completely set on having an engine with boost why not try to find a deal on a used Weiand 142 or 144 blower instead?
I always thought the 70 Challenger/Cuda were cool.
The 70 Challenger had it's own movie, it must have been somewhat popular
I always installed headers from underneath, I don't think long tube will fit from the top. I had hooker super comp 1 3/4 on my 81. I used the...
Thanks for the reply. The block is already machined and rotating assembly is balanced, I had all this machine shop work done years ago. If I...
I am expecting power on mine peak around 5,800 - 6,000rpm
How high of an RPM does it pull to?
I saw the video you posted of you car idling, it sounds badass
The stock GM 10 bolt 8.5" rear with 4.10s with limited slip. I have a Munci M21. My long term goal is a 4L80E.
I already have all the parts. I started the build years ago and ended up selling my 81 camaro without the motor and transmission.
I guess I am...
I am second guessing using my old pre-eliminator AFR 195s in my 400 build-up, I originally bought these heads back in 1997 or 1998 and used them...
I think it was in 1969 it was a cross ram that came in the trunk
My Crane 296HR hyd roller cam is a billet cam with a pressed on cast iron distributor gear.
He probably would have got more responses and entertainment if he made a controversial oil thread instead.