Separate names with a comma.
Cylinders 1234 run rich, cylinder 5678 fine, any ideas, 454 chevy 850 holley, roller cam
Anyone have a set of these wheels for sale ?
seems my 79 dash pad is wider
was looking for tires with a y speed rating in 15 inch no luck, other than drag radials whats out there, dont want skinny front drag tires
did anyone make a turbine wheel wider than a 7 inch like the ones that came from the factory
have read everywhere that you need 1/2 in line to support 700hp, yet 90% of the fuel pumps and regulator fittings are 3/8, doesnt that restrict...
installed new eaton posi and the old cover will not fit back on. help
How do you remove the hub from the rotor on a 79 camaro
Trying to find out which Eaton posi for my 79 camaro, it is a 10 bolt 8.5 28 spline non posi, I want to upgrade to 30 spline posi.
Which eaton posi will work on my 79 camaro 10 bolt 8.5 its 28 spline but I want to go to 30
The tech guy at Howards cams recommended this can to me #120405-8. It has 618 lift 235\[email protected] 288\294 dur. 108 lobe sep. This seems like a...
No one seems to offer springs for a big block in a 79 camaro does anyone know what springs to use and keep ride height ?
If a can has a 618 lift and the springs are 625 springs is that too close or will it work ?
Here is what I have , 454 bored 30 over forged speed pro pistons with 30 cc dome forged rods stock crankshaft brodix race rite heads with bowl...
How much compression and HP will a stock BBC crankshaft handle ?
Will h beam rods fit a stock stroke 454 without clearance issues
Need help finding forged pistons that will get compression around 10.1 with 119 cc heads on a 30 over 454
OK I have a 454 bored 30 over forged pistons and rods +18 cc dome still need cam and heads going to use brodix heads just don't know which ones,...
Forged rods and pistons stock crank how much nitrous can you run
454 bored 30 over do you have to rebalance the engine when you buy new pistons