Search results

  1. 73 Z

    Buy a Camaro Z28 1971

    What carb is on that motor now? Original would have been 3989022-AD
  2. 73 Z

    Anyone with Hydroboost + G Braces installed?

    Yes, went with a 94 Astro van unit. check out the link or search hydro boost https://nastyz28.com/threads/hydroboost-install-on-2nd-w-pic.320238/page-6
  3. 73 Z

    Carburetor size

    Did the engine not come with a carb, has this been ran?
  4. 73 Z

    Wilwood disk clearence

    Is the photo taken from back to front at driver side (left)? If so the shock on the passenger side lower mount should be towards front of car
  5. 73 Z

    Wilwood disk clearence

    If this retrofit is based off a bolt on kit using original style suspension set up, the calipers are mounted the opposite side of shock with the brake bleeder at the top.
  6. 73 Z

    Wilwood disk clearence

    I mounted the calipers 180 or opposite side of lower shock mount. you by chance have 2 rights, bleed valve is always at top
  7. 73 Z

    Overheating Carb vs Efi

  8. 73 Z

    Stumble accelerating from a stop

    I assume when you say one pump of accelerator and nearly stalls, this is under load and not in neutral. Idle mixture screws are generally 1.5 turns out from lightly seated. When setting the main idle screw, do not open past transfer slots at carb butterflies. Cam duration and compression has a...
  9. 73 Z

    Stumble accelerating from a stop

    Is this an all-in acceleration? Auto or manual trans
  10. 73 Z

    Paint code 97 on 73 Z28

    Yes, the color was discovered during tear down, then cleaned and covered only at that cowl side cowl, to retain the original color. confirmed with trim tag code 97 no stripes.
  11. 73 Z

    Paint code 97 on 73 Z28

    Code 97 Medium Orange Poly - PPG 2555 https://cdn.shopify.com/s/files/1/0271/7931/9375/files/1973-chevrolet-pg01.jpg?9348
  12. 73 Z

    1970 Z28 Color (LA Build), thought it was green mist then I put it in the light...

    Look for the partial vin on firewall stamped by the blower
  13. 73 Z

    Need coil spring advice

    If you want stock ride height, install the stock springs for a non a/c 70 Z28. Don't overlook the rear leaf's if they are original, they're likely worn out.
  14. 73 Z

    Trunk mat

    No mat here, just rubberized spray paint
  15. 73 Z

    Driver side remote mirror - Rebuild?

    The Classic Industries looks like the way to go, and you'll have an extra ready to paint mirror body.
  16. 73 Z

    1970 Z28 Color (LA Build), thought it was green mist then I put it in the light...

    Looks like, PPG 63 - 2183 Desert Sand Poly
  17. 73 Z

    The 2 word game

    Game day
  18. 73 Z

    Pulling to the left with all new suspension/steering compnents

    Also, cross check subframe alignment with a tape measure to a fixed surface, like the front of the rear spring mounts. Possibly the steering box tension adjuster is too tight, but this usually results with steering staying in the direction its left at when you let go of the steering wheel. Maybe...
  19. 73 Z

    The 2 word game

    Issues found




Latest posts

Top