Search results

  1. Jet

    Heater Core Foam Seal Placement

    Sounds good, appreciate the input.......
  2. Jet

    Heater Core Foam Seal Placement

    TTP.....
  3. Jet

    Heater Core Foam Seal Placement

    This is on a non-AC '74 Z-28....if I am leaning over the passenger-side fender, looking at the heater core tubes coming out of the firewall, which position will the seal go over the tubes.....pics included.
  4. Jet

    18-Year-Old Curiosity

    5 1/2-year bump......
  5. Jet

    Reinstalling Heater Core, Thoughts/Experiences On Proper Way To Seal

    I wound up getting a heater core that is the same thickness as the original, now ready to put it in the repainted heater box. There was some petrified black sealer on the old one, and I already have some 3M Strip Caulk I will probably use, since it looks similar to the old stuff. Looking for...
  6. Jet

    Aftermarket Firewall Insulation Pad Options

    Appears there is a generic pad offered vs. a molded OEM type, pretty good difference in price too. Has anyone recently replaced this item, if so, with what type, regrets, PITA, etc.?
  7. Jet

    Best replacement Heater Core brand?

    Interested here as well. Got the heater box/core out this past weekend, and the new heater cores are understandably thinner than the OEM. Thinking of getting the original one recored, for security as well as fitment.........
  8. Jet

    Wiring mini-starter

    I recently put a DB Electrical mini starter on my car, and it use a spade connector instead of a ring........
  9. Jet

    Proper Fastening Hardware For Upper & Lower Grills

    Gives me a fresh vantage point, thank you very much for the pics......
  10. Jet

    70 camaro on misfit garage

    Always remember....the first casualty of reality television is.....reality.
  11. Jet

    Custom rear view mirror

    http://www.liveauctionworld.com/LANE-CHANGER-REAR-VIEW-MIRROR_i27975682 This one is cleaner than the version that sticks on to your existing mirror, but seems they are not as readily available as they once were....
  12. Jet

    Proper Fastening Hardware For Upper & Lower Grills

    Mine have been out of the car for so long not sure what the fasteners were originally, anyone have any pics, part numbers, etc. on the proper hardware? It also seems like the two center holes on the upper grill have a gap between them & the areas behind them where they need to reach.....
  13. Jet

    To Grease Or Not To Grease, That Is The Question....

    All participants will receive absolutely nothing for answering this poll......
  14. Jet

    New Wilwood Prop. Valve, Anyone Using It?

    OK, mine being a '74 the lines should obviously be the same. From reading reviews on Amazon, the line coming from the rear is probably the one needing an adapter fitting......
  15. Jet

    Power steering pump

    I saw new replacement stock-type pumps in a Jeg's catalog the other day, around $160 or so.....
  16. Jet

    New Wilwood Prop. Valve, Anyone Using It?

    What year is your vehicle?
  17. Jet

    New Wilwood Prop. Valve, Anyone Using It?

    1977 Chevrolet Monte Carlos, Malibus, and El Caminos.....I originally bought complete backing plates from the junkyard, but went overboard from there & bought everything new instead.
  18. Jet

    New Wilwood Prop. Valve, Anyone Using It?

    Thanks for the reply. Back when I was daily-driving it, with bone-stock brakes, I had to hit the brakes pretty hard on a curve, and the ass-end swung into the oncoming lane (two-way road with no divider, dry conditions). Now, the car will have 11" rear drums, and soon the 1LE swap in the front...
  19. Jet

    New Wilwood Prop. Valve, Anyone Using It?

    https://www.wilwood.com/Search/PartNoSearch?q=260-11179 Wondering if this could be used in a disc/drum set-up, Wilwood doesn't say either way......
  20. Jet

    A Smokey And The Bandit Revelation!

    You can't put a price on gained wisdom.....you will appreciate it as you get older....




Latest posts

Top