Search results

  1. Hulk_smash

    sbc-ALUMINIUM HEADS

    The last ones were my old ones the iron heads
  2. Hulk_smash

    sbc-ALUMINIUM HEADS

  3. Hulk_smash

    sbc-ALUMINIUM HEADS

    THEY WERE AT THE TURKEY RUN SO THEY WERE AFTER MARKET FROM A GUY SHOP SO IM THINKING THATS ITS OFF I CALLED HIM UP AND HE TOLD ME ITS MY INTAKE WHICH IS A RPM EDLEBROCK NA I HAD DOUBLE HUMPS ON THERE RECENTLY AND FIT JUST FINE JUST THESE ALUMINIUM ONES
  4. Hulk_smash

    sbc-ALUMINIUM HEADS

    I HAVE A 79 BLOCK AND GOT SOME AFTERMARKET HEADS ALUMINUM AND I HAVE A BIG ASS GAP FROM MY INTAKE TO MY HEADS IM TALKING A 1/4 OF IN INCH HAS ANYONE ELSE HAD THIS PROBLEM AND IF SO HOW DID YOU FIX IT I EVEN TRIED MT OLD INTAKE AND ITS THE SAMETHING DOES ADD UP TO ME AND I SPENT ALOT OF MONEY ON...
  5. Hulk_smash

    ls swap (central fl)

    I was currently building a small block chevy and I had some problem so im going to just sell the parts and build an ls does anyone know where I can find an ls swap with a ls1 or a 6.0 to drop in it or
  6. Hulk_smash

    She’s ALIVE

    She’s ALIVE
  7. Hulk_smash

    Rocker arms

    Yes i do have guide plates and are those self alignment
  8. Hulk_smash

    Rocker arms

    I have a flat tapper cam but i wanted to know if i could use a roller rocker arm i mean i don’t wanna mess anything up or lose power
  9. Hulk_smash

    Victor jr or performer intake

    I was thinking about it but what’s a decent shot of nitruous so I want have to rebuild my motor in like 2 years but my pistons are forged
  10. Hulk_smash

    Victor jr or performer intake

    So if I was to use a spacer and try to notch the intake like the air gap performer your telling me it would be a lot better and give me what I’m looking for top end and low end and yes my pistons are forged
  11. Hulk_smash

    Victor jr or performer intake

    The heads were 202s but got changed to 205 and They are 186’s but the motor has new crank and pistons and rods I had a spun bearing and a crack head so I’m rebuilding but I want more power as in more horsepower top end
  12. Hulk_smash

    Victor jr or performer intake

    My cam is 1500 6500 rpm and my heads are 205 and my gear is stock I’m going to get 373 but later down the line I bored the motor 30. Over and the heads have a little work done I got them from my machine shop
  13. Hulk_smash

    Painted my block just have to put things together

    Painted my block just have to put things together
  14. Hulk_smash

    Victor jr or performer intake

    I have a victor jr and and performer the victor jr is single plane and the other one is dual but I want more top end but I’m hearing that my low end will be dead with the victor jr it’s going on my sbc 79 z28 camaro so I need to know if I use the victor jr will it give me more top end where the...
  15. Hulk_smash

    Still need some parts but we are making progress

    Still need some parts but we are making progress
  16. Hulk_smash

    Motor should be coming out soon

    Motor should be coming out soon
  17. Hulk_smash

    Ls1 or sbc 350

    So I have a victor jr inatke and my heads are 205 instead of 202 double camel humps and I have a new cam 488/510 new pistons and lifters but my machinist said this is basically stock which is why I wanted to go ls but motor should be getting out of shop this week
  18. Hulk_smash

    Ls1 or sbc 350

    Ok im going to get the car moving then I will upgrade to a ls motor later but I took my sbc down to the machine shop and have some bad news and some good I have one cracked head and I spun a bearing on my crankshaft but my block is decent I have to get it bore 30 over I want better heads 462624...
  19. Hulk_smash

    Ls1 or sbc 350

    Ok so a big block 168t ok how do you like it with the 4 gears? And what year is your. Car what changes will I have to do with like the motor mounts and things I know certain things will have to be changed like the wire harness
  20. Hulk_smash

    Ls1 or sbc 350

    I won't be able to keep my four speed unless I change the bellhousing is that correct because I would like to keep it manual
Top