heads

Hey all, Finally going to turn my SBC 350 into a 383 Stroker, I've been researching it for a while but still not sure about the combinations. It is going to be a Street/Strip Build, looking for a cam and head combination that would be comfortable to cruise in and be killer in the strip. Not...

I’ve owned a 1979 camaro z28 for close to 8 years now. Got the car when I was 15. It was a barn find with 22,000 original miles. 350 with a 4 speed. Came with all original paperwork, Jack, spare. All original from factory. Amazing shape. I put a lot of time into it when I was younger, stopped...

Hey guys, I have some 292 turbo heads I’m using. I cannot figure out what spark plugs to use!! Anyone out there have/had 292 heads and remember what plugs will work? I have read one forum that said ac Delco r43ts. I’m hoping someone can help here.

Located in 32221, pickup or buyer pays shipping. Upload pics when I get a chance, until then here's the fb market listing https://www.facebook.com/marketplace/item/165567578120997/ 454 parts will sell separate or all for $800 obo. Was going to build a 496, but decided to go with a Dart block so...

hey everyone , hoping I can get some insight, im wanting to upgrade my heads and get some more horse powerout of my engine but don't know which will work best and be most cost effective ,my current set up is a 79 z28 , 4 spd car with a 454 bored 60 over , im running the holley sniper efi and...

This is a 1974 4 speed carb and intake I picked up. $550 I also have a 74 4 bolt standard bore block. I will have to check the front code to see if it's a truck or car code on the front pad. $400 Also have 74 z28 heads still in the bags from the dover cyclinder head, all new valves and seats 202...

First generation small block Chevy camel hump heads, 1.94 intake-1.5 exhaust, casting number 3782461, removed from mid-60s 327, $75 First generation cast iron four barrel intake, casting number 3866922, removed from same engine, with Rochester carburetor $50 First generation SBC valve covers...

Will buy new in a few weeks if I have to but I'm a college student and would love to save a buck or two if I can. Looking for a 64cc/190-200cc runner or something around there. Similar to Blueprint's H8002K. Will be sitting on a 10.2:1 350 with an XE274. Have a budget of about $600 USD. Thanks :)

1971 Camaro Hugger Orange w/ pearl and silver rally stripes Done by Surfside Collision Brick NJ 454 Bored .30 over Built by Tims Machine Shop In Toms River NJ Crane Roller Cam, Crane Gold Roller Rockers, Pro Comp aluminum heads 700 R4 Transmission rated at 600hp w/Bow Tie Overdrive TV...

1971 Camaro Hugger Orange w/ pearl and silver rally stripes Done by Surfside Collision Brick NJ 454 Bored .30 over Built by Tims Machine Shop In Toms River NJ Crane Roller Cam, Crane Gold Roller Rockers, Pro Comp aluminum heads 700 R4 Transmission rated at 600hp w/Bow Tie Overdrive TV...

1971 Camaro Hugger Orange w/ pearl and silver rally stripes Done by Surfside Collision Brick NJ 454 Bored .30 over Built by Tims Machine Shop In Toms River NJ Crane Roller Cam, Crane Gold Roller Rockers, Pro Comp aluminum heads 700 R4 Transmission rated at 600hp w/Bow Tie Overdrive TV...

These are pictures of our 496 Big Block Chevy buildup. The heads are Dart Aluminum with stainless steel valves, Dart stud gridle Harland Sharp rockers. The balck disk bolted to the harmonic balancer is part of the crankshaft position detection system for the Fuel injection. It has 36 teeth...