stroker

Hey all, Finally going to turn my SBC 350 into a 383 Stroker, I've been researching it for a while but still not sure about the combinations. It is going to be a Street/Strip Build, looking for a cam and head combination that would be comfortable to cruise in and be killer in the strip. Not...

Wanting to get some input on whether I should upgrade to a 383 stroker in a 71 camaro. My current 350 sbc engine has a solid Flat tappet cam that went flat so the engine is going to be rebuilt. I'm most likely going to put in a hydraulic roller in because I think I would get better performance...

Alright so current build in progress is my 0.40 over 350 sbc went with a stroker kit so 385ci, edlebrock proflow fuel injection afr competion ported 210cfm,64cc chambers. With my pistons ill be at 11:8:1 i plan on running 110 octane (rated for up to 13:1) with the extra octane and the tuning...

Hey y'all, Second time posting here I hope this is the right place, I thought I'd see what you're opinions are on my times and what I could do to get faster. I tried to keep it mild enough to drive 100 miles round trip to work a couple times a week. Y'all think I went too mild? 1973 Z28 4 bolt...

I am currently putting together a small block chev stroker. It has an eagle forged crank and wiseco Tru-Street pistons. I am putting AFR 195cc heads on it. The shortblock is assembled and the pistons stick out of the cylinders 0.115". What is the best way to address this? My first...

Hey, I’m currently in the process of making my camaro better on the strip. I’m building a 388 stroker, nothing real special, carbureted with vortec heads. It will have hooker headers and 2.5 inch dual exhausts and a comp cams mutha thrumpr hydraulic roller. It’s not exactly a real performance...

Up for sale is a 1971 Chevrolet Camaro SS. If you want to see more pictures here is the link to our website. https://www.apvintagemotors.com/1971-chevrolet-camaro-ss-/-z28-tribute-4-speed-statesville-nc-28677/6528782 This camaro has the rare split spoiler and is in amazing condition as...

I have been in a love hate relationship with my Camaro since I bought it at 18. I have swapped the engine 3 times already and gone through countless sets of wheels and tires Anyway enough of the never ending aspect of my car and on to its reincarnation this time. This time around I have decided...

Hello all I have a 327 in my 71 right now which will need new piston rings soon as far as I can tell it’s a large journal 4 bolt main block but I haven’t cracked it open yet and I am deciding on whether or not to rebuild it with a 383 stroker crank and new lifters while I’m putting rings in it...

Hello, new to the forum and I've been searching around for an answer to my question and can't find one. I have a sbc 350 that was bored .040 over and the cylinders are wallowed out .003 I'm assuming from pistons rocking back and forth because they're 4.040 one way and 4.043 the other. What is my...