1970 Backing Plates ?

Discussion in '1970 - 1973 Specific' started by 67johnny, Oct 16, 2020 at 11:12 AM.

  1. 67johnny

    67johnny Veteran Member

    Messages:
    225
    Likes Received:
    10
    Joined:
    Apr 14, 2016
    Location:
    vancouver
    Hey All!
    Looking to replace the 9.5 rear brake backing plates as the anchor pins will be time consuming to restore.
    Are there any sources for some non off-shore replacements?
    Not sure if the aftermarket replacements even have adjuster holes etc.
    I do know it was mentioned that the thickness of the steel may be thinner.

    Thanks.
     
  2. dave@ztech

    dave@ztech Veteran Member Lifetime Gold Member

    Messages:
    4,408
    Likes Received:
    981
    Joined:
    Mar 27, 2016
    Location:
    NY
    I have a set in a box I will not need as I am going with disk , let me know if you have an interest ,
     
  3. 67johnny

    67johnny Veteran Member

    Messages:
    225
    Likes Received:
    10
    Joined:
    Apr 14, 2016
    Location:
    vancouver
    Hi Dave.
    Great.
    Need a price and a zip to check shipping costs|if possible !
    Thanks.
     
  4. dave@ztech

    dave@ztech Veteran Member Lifetime Gold Member

    Messages:
    4,408
    Likes Received:
    981
    Joined:
    Mar 27, 2016
    Location:
    NY
    Hi, They are at zip code 12477 NY , I will find the box today , which will be a little bit of a challenge , as I haven't had a cleaning lady in here for 7 1/2 months , however, I was still buying stuff, and the dog was still making a mess, took her 15 hours just to clear the accumulated boxes and clean the floors , HAAA HA , now I just need to figure out where she put everything that was in boxes and where she put stuff that I told her to leave in boxes HAAA HA A , I will look today , and I will post a couple of pictures.
     
  5. dave@ztech

    dave@ztech Veteran Member Lifetime Gold Member

    Messages:
    4,408
    Likes Received:
    981
    Joined:
    Mar 27, 2016
    Location:
    NY
    Hi,
    here are a couple of pictures of one side they are in the same shape, have left and right
    Camaro rear backing plate 1.JPG Camaro rear backing plate 2.JPG Camaro rear backing plate 3.JPG Camaro rear backing plate 4.JPG Camaro rear backing plate 5.JPG Camaro rear backing plate 6.JPG
     
  6. dave@ztech

    dave@ztech Veteran Member Lifetime Gold Member

    Messages:
    4,408
    Likes Received:
    981
    Joined:
    Mar 27, 2016
    Location:
    NY
    What do you think? How about 40 for the pair plus shipping, they weight about 4 pounds each? and the box is 12x12x6 , let me know , no rust , and they have the thing attached, that can be rebuilt I am sure , the lines were clipped off,
     
  7. 67johnny

    67johnny Veteran Member

    Messages:
    225
    Likes Received:
    10
    Joined:
    Apr 14, 2016
    Location:
    vancouver
    Sending you a PM .
     

Share This Page