After photos of installed Pro Flo 4 units

Discussion in 'High Tech Retrofits' started by simso, Apr 24, 2020.

  1. rburrow87

    rburrow87 Veteran Member

    Messages:
    135
    Likes Received:
    45
    Joined:
    Apr 6, 2016
    Location:
    San Diego, CA
    Just an MSD 6EFI CD box for the coil. Honestly don't know if it really makes much real world difference but I figured the extra spark at low RPM/idle couldn't hurt since I'm running 14.7 AFR for idle and cruise. Does seem like it idles a little smoother with it in the loop.
     
  2. BonzoHansen

    BonzoHansen Administrator Lifetime Gold Member

    Messages:
    19,955
    Likes Received:
    1,268
    Joined:
    Jun 1, 2005
    Location:
    Scott from Hamilton, NJ
    What compressor is that and do you think it would clear tall valve covers?
     
  3. rburrow87

    rburrow87 Veteran Member

    Messages:
    135
    Likes Received:
    45
    Joined:
    Apr 6, 2016
    Location:
    San Diego, CA
    It's a Sanden 4665 that came with the Vintage Air.

    I don't think tall valve covers would clear. Or if they did, it would miss by a hair. The angle is off a tiny bit in the pic so it almost looks like there's room, but I can't confidently say they would clear unless they have a smaller footprint than the stock covers. Although, these Trick Flow heads claim to have raised valve cover rails but I'm not sure by how much.

    [​IMG]
     
    BonzoHansen likes this.

Share This Page