Bullitt Mirror Glass Measurements

Discussion in 'Body Restoration' started by aps63, Mar 19, 2011.

  1. aps63

    aps63 Veteran Member Lifetime Gold Member

    Messages:
    476
    Likes Received:
    5
    Joined:
    Sep 4, 2007
    Location:
    N.J.
    Can anyone give me measurements of the pass side glass?
    I ordered new glass and the drivers fit great but the pass side is way off.
    Thanks
     
  2. falloutboy

    falloutboy Veteran Member

    Messages:
    2,283
    Likes Received:
    15
    Joined:
    May 1, 2003
    Location:
    Grafenberg, Baden-Württemberg, Germany
    I am at the Camaro tomorrow - I'll post some measurements
    But they are installed in the housing - so dont expect too much
     
  3. aps63

    aps63 Veteran Member Lifetime Gold Member

    Messages:
    476
    Likes Received:
    5
    Joined:
    Sep 4, 2007
    Location:
    N.J.
    Anything would be great.
    Thanks
     
  4. falloutboy

    falloutboy Veteran Member

    Messages:
    2,283
    Likes Received:
    15
    Joined:
    May 1, 2003
    Location:
    Grafenberg, Baden-Württemberg, Germany
    Here you go. First, I ope its the correct mirror.
    Second, remeber these are metric (millimeter) measurements

    [​IMG]
    [​IMG]
    [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]
     
  5. falloutboy

    falloutboy Veteran Member

    Messages:
    2,283
    Likes Received:
    15
    Joined:
    May 1, 2003
    Location:
    Grafenberg, Baden-Württemberg, Germany
    Passenger side, just in case

    [​IMG]

    [​IMG]
    [​IMG]
    [​IMG]
     
  6. aps63

    aps63 Veteran Member Lifetime Gold Member

    Messages:
    476
    Likes Received:
    5
    Joined:
    Sep 4, 2007
    Location:
    N.J.
    Thanks alot for the info and pictures falloutboy.
    The pass mirror I got from NPD is 80cm high(almost 3-1/4").
    That is way to big. I will order one from someone else tomorrow.
    Thanks again for your help.
     

Share This Page