Headers for angle plug heads SBC?

Discussion in 'Engine Topic' started by saturnshadow, Dec 18, 2009.

  1. saturnshadow

    saturnshadow New Member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Dec 14, 2009
    Location:
    Fresno, CA
    I have a 79 and trying to find headers that fit angle plug heads.
    Anyone have any ideas, experience?
     
  2. 79RedZ

    79RedZ Veteran Member

    Messages:
    762
    Likes Received:
    72
    Joined:
    Mar 24, 2009
    Location:
    Hamilton,MI
    Whats your combination? I have the hedman 65104, which were on sportsman II heads with angle plugs. They are 1 3/4" tubes. But maybe you need less...or more.

    Check for another thread that was started a few days ago that was also about headers.
     
  3. seventy7camaro

    seventy7camaro Veteran Member Lifetime Gold Member

    Messages:
    1,465
    Likes Received:
    23
    Joined:
    Feb 6, 2005
    Location:
    Covington, Virginia U.S.A.
    I've got Hooker Super Comps on my 383. 1 3/4"
     
  4. Battmann

    Battmann Veteran Member

    Messages:
    708
    Likes Received:
    2
    Joined:
    Sep 12, 2007
    Location:
    North Chili, NY
  5. saturnshadow

    saturnshadow New Member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Dec 14, 2009
    Location:
    Fresno, CA
    i am planing on buying the Pypes Violator Dual Exhaust System.
    so i was looking at full length headers.
    350 40 over, 10.5:1 forged, voodoo 60103
    you have any fitment issues with the hedman 65104?
     
  6. gingerbreadman

    gingerbreadman Veteran Member

    Messages:
    785
    Likes Received:
    2
    Joined:
    Jun 2, 2009
    Location:
    gold coast , australia
    i have no problems with hookers either on angled plug heads. both sides fit nicely.

    [​IMG]

    [​IMG]
     
  7. Orange71

    Orange71 Veteran Member Lifetime Gold Member

    Messages:
    3,792
    Likes Received:
    3
    Joined:
    Jan 31, 2001
    Location:
    Finksburg, MD
  8. saturnshadow

    saturnshadow New Member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Dec 14, 2009
    Location:
    Fresno, CA
    damm $660 is out of my price range for just headers right now.
    i was looking for something in the $300 or less range.
    I have an F-load in custom saturn parts so i don't have allot for my camaro right now. once my turbo conversion is done on my drag saturn then i can put more into the camaro.
     
  9. 79RedZ

    79RedZ Veteran Member

    Messages:
    762
    Likes Received:
    72
    Joined:
    Mar 24, 2009
    Location:
    Hamilton,MI

    not really, plugs are easy to get at. the only issue I had was on the driver side the #7 tube had a little creamic coating rubbed off from when the engine would rock over and touch the lower a-arm brace, didn't dent it.
     
  10. badslife2

    badslife2 Veteran Member

    Messages:
    491
    Likes Received:
    3
    Joined:
    Nov 11, 2001
    Location:
    Saginaw,MI
    how is your Ceramic Coating holding up?
     

Share This Page