Homemade Tools/Equipment

[SRADkneedragger]

Oops! You already figured out that's the wrong video that's the wheel balancer. We have used this balancer very successfully not only to balance tire and wheel assemblies but also wheels on several 190 and 200mph bikes. No that's not me riding that's my Wife!
Ok here's the lift
http://s4.photobucket.com/albums/y109/ns50r/200MPH/?action=view&current=P1010009-3.mp4

SRAD

 

[x.system]

I like building stuff.

My first rotisserie. I've probably built 5 or 6 now. I usually sell them once they are done.

Yard guard for plows, keeps from tearing up gravel or lawns until the ground is frozen.

Pull plow for pickups.

Wings for my plow that fold back behind the plow when not needed.

 

[81forme]

built a new tool today for my new hvlp spray gun

 

[Prototype4342]

I built this tool to remove a stuck oil filter. I was working on this for two days before I decided to make this tool, screwdrivers, belts, all types of oil filter wrenches, nothing worked.

 

[david.cordle]

Put my Wheel dollies back to work.

 

[Aceshigh]

Ok here's the lift
http://s4.photobucket.com/albums/y109/ns50r/200MPH/?action=view&current=P1010009-3.mp4

I am going to be wanting one of these for my Busa as well.
I got creative with a floor jack to pop my rear tires off.

Worked okay, but I think this would be cool if it's reasonable $$ to do it.

 

[clay's70]

Door mover

 

[Jodi]

This is a Ford 9" third member floor jack adapter I made awhile back.
Makes removal and installation of the 3rd member so much easier.

 

[clay's70]

Portable Band Saw Stand

Clamped from underneath

Added a foot pedal

 

[camaro71/holland]

Don't know if any of you are messing with Torqueflites, but I just recently have and couldn't find a socket that would fit the bolts to adjust front/rear band.

You can buy the correct tool (rare and probably expensive), buy an 8 point 5/16" or mm socket (couldn't find it here), or make your own tool from a piece of scrap and any size socket (that will fit between the plunger).