I replaced my motor mounts today (engine out) and it was easy thanks to the info I have gathered from this site. Anyway I read a post from a search I did where someone cut the old bolts off from the top w/ a grinder,then "fished"the new hardware up through the bottom w/ a piece of wire wrapped around the bolt. I tried this method and it worked great.I pulled the new bolt up,started the nut by hand then cranked it down w/ an impact gun. The whole process took about 35 min from start to finish.I didn't even have to jack up the car.I just wanted to say THANKS to all people who post there experiences they have w/ these cars.
